1. Home
  2. Queues


How to Create, Manage, Delete

Click on the Services Tab at the L4 Level .

From the left panel, under Call Center, Click on Queue. 

Click the New Queue button.

In the General Settings section, enter the following information:

NameA name to uniquely identify the queue
Caller ID PrefixDetermines how the Caller ID of an incoming call is displayed on an agent’s phone.
There are four options:•Original Caller ID – Displays the caller’s original Caller IDCustom Text Only – Displays only the text that is entered in the adjacent text field•Custom Text: Original Caller ID – Displays the text entered in the adjacent text field, plus the caller’s original Caller ID•None – Displays nothing on the agent’s phone
Queue TimeoutThe number of minutes that an incoming call will remain in the queue before it is routed to another location within the Hosted PBX
After TimeoutDetermines where the call is routed to once the Queue Timeout (above) has expiredNOTE: Selections made in the After Timeout dropdown list may prompt a subsequent choice in another dropdown list.
Can Callers Join an Empty Queue?Yes – All incoming calls will join the queue, even if no agents are logged into that queue.•No – Incoming calls will not join the queue if empty; instead, the call will be routed to the “After Timeout” destination 
Set Maximum Call PathsThis allows you to set an upper limit on the total number of Call Paths that a Queue can simultaneously use.The intent is to prevent one Queue from using all Call Paths for a Customer Account.•Yes – Then you must specify:The maximum number of call paths the Queue can (simultaneously) use.A routing destination for calls that are received when the Queue has no available call paths left.When you click Save, the system automatically calculates the number of available call paths, and displays a warning if you attempt to over-assign call paths. It does not prevent over-assignment of call paths, but does make you verify the action.•No – The Queue will be able to use as many call paths as it requires.  If no paths are available (because all call paths for the account are currently in use), then callers will receive a busy signal. 

In the Ringing Strategy complete the following information:

Ring StrategyRing All – Rings all agents who are logged into the queue at the same time until one answers•Least Recent – Rings the agent who least recently answered a queued call•Fewest Calls – Rings the agent who has taken the fewest calls•Random – Randomly rings all agents who are logged into the queue•Round Robin – Rings to evenly distribute calls among all agents who are logged into the queue
Ring Each Agent ForThe length of time in seconds that the agent’s phone will ring before the call is sent to the next available agent
If Agent on a CallSpecifies the action taken if the agent is currently on a non-Queue call (such as a personal call).•Ring Agent -Calls will be sent an Agent even if they are currently on a non-Queue call (such as a personal call).Agents will receive an indicator that a new call is in their Queue.Do Not Ring Agent – The call be processed per the Ring Strategy (e.g., Round Robin, etc.).NOTE:  Regardless of this setting, calls are never sent to an Agent who is currently on a Queue call.
Wrap-up TimeThe amount of time, in seconds, that the queue should wait before sending  another call to the agent once that agent finishes a queued call. Zero (0) is an acceptable value.

Define what callers hear, and what they can do, while in the queue:

Play Periodic Announcements?While callers are waiting in the queue, they will hear the hold music from your Hosted PBX. You may choose to have an announcement periodically interrupt the hold music and play to the waiting caller.If Yes is selected, two more fields will appear:•Announcement Audio – select the mailboxthat contains the audio to be playedNOTE: the message must be recorded in the busy greeting of the mailbox.How often – the interval of time, in seconds, that will elapse before the announcement is repeatedNOTE: while the announcement is playing, the caller is not being offered to an agent.
Can Caller Press 0 to Exit Queue?If Yes is selected, your periodic announcement should inform the caller that they are able to do so.
If Caller Presses 0Specifies where the waiting call will be routed to when 0 is pressed.NOTE: Selections made in thedropdown list may prompt a subsequent choice in another dropdown list beside or below it.

In the Agents Assigned to This Queue, do the following:

  • From the Available agents block on left, click on the agents name that you want to add to the agents to ring block and then click on the green Add button.

In the User Group Assignment, you can add what group you want this agent to be part of. 

  • Click on the group name in the Available block and click Add.  This will move that group to the Assigned block.

Click Save


Agents are people who receive incoming calls from a queue. To receive queued calls, they must first be set up as an Agent and then assigned to one or more Queues.

To access the Agents screen, click the Agents menu option in the Call Center section of the menu panel on the left. From this screen, you can search for, add and delete an agent.

Creating a New Agent

  1. Click the New Agent button.
    The New Agent screen appears.
  2. Enter the Agent ID, which must be a number from 1 to 5 digits long.
    The Agent will use this ID number to log in and out of his/her assigned queue(s).
  3. Enter the agent’s Name as it will appear in the Call Center reports.
  4. Click the Save button.

Deleting An Agent

  1. In the Agent list, click the Agent ID or their corresponding Edit link to the right.
    The Agent Detail screen displays.
  2. Click the Delete button.

Reason Code

When an Agent needs to stop receiving calls temporarily, but does not want to log out of his/her queue(s), the Agent can pause their incoming queue calls.

The Agent will be reported as logged into the queue(s) during the pause, but he/she can provide a Reason Code to indicate why. The pause event and corresponding Reason Code are logged and reported in the Real Time Console.

Configuring Reason Codes

From the Reason Codes screen, you can enter text for 9 different reason codes.

  1. Click the Reason Codes menu option in the Call Center section of the menu panel on the left.
    The ACD Reason Codes Configuration displays.
  2. Enter reason codes in the fields provided for Reason Code 1 through Reason Code 9.
    Enter as many as needed.
  3. Click the Save button.

Tally Code

When an agent receives a queued call and needs to assign it to a specific category for billing or other purposes, he/she can provide a Tally Code to indicate the nature of the call.

From the Tally Codes screen, you can enter names or descriptions for 10 Tally CodesTally Codes are tracked in the Queue Call Activity Report.

Configuring ACD Tally Codes

  1. Click the Tally Codes menu option in the Call Center section of the menu panel on the left.
    The ACD Tally Codes Configuration screen displays.
  2. Enter ACD Tally Codes names or descriptions in the fields provided for Tally Code 0 through Tally Code 9.
    Enter as many as needed.
  3. Click the Save button.
Updated on August 30, 2021

Was this article helpful?