Configure a Meraki Switch for VoIP

This guide outlines recommended configurations for a Meraki MS switch to prioritize and separate VoIP traffic, ensuring optimal call quality.

1. Configure switch ports as access ports.
2. Assign Data and Voice VLANs.
3. Enable and configure QoS settings.

1. Configuring Access Ports

1. In the Meraki Dashboard, navigate to Configure > Switch > Ports.

2. Select the port to modify.

3. Change Type to access.

4. Save your changes.

2. Configure Data and Voice VLANs

1. Ensure the port is set to access mode.
2. Enter your Data VLAN ID.
3. Enter your Voice VLAN ID.
4. Save your settings.

3. Configure QoS Settings

1. In the Meraki Dashboard, go to Configure > Switch Settings.
2. Scroll to the Quality of Service section.
3. Enable QoS and add a rule for Voice VLAN (e.g., VLAN 20).
4. Save the configuration.

These settings ensure that voice packets are tagged and prioritized across your network, reducing latency and improving call reliability.